Performance Optimization: A Guide to Radial Shaft Seals with Low Friction Coefficients and High Compressive Strength<\/p><\/h2><\/div><\/div><\/div><\/div><\/div>
Versatile \u2013 Uncompromisingly airtight<\/p><\/h3><\/div><\/div><\/div>
![\"Radialwellendichtring](\"https:\/\/domselag.ch\/wp-content\/uploads\/2017\/01\/typa.jpg\" "\\"typa\\"")
<\/span><\/div>Design Type A<\/p><\/h2><\/div>
The sealing lip is aligned with the direction of press-fit.<\/p>\n
Application: Standard, simple sealing points.<\/p>\n<\/div>
<\/i><\/i><\/span>Installation \/ Dimension Lists: A<\/span><\/a><\/h3><\/div>\nInstallation Instructions<\/a><\/strong><\/h4>\nInstallation Steps<\/strong><\/a><\/h4>\nMeasurement Chart<\/strong><\/a><\/h4>\nPK Version<\/strong><\/a><\/h4>\nOrder Information<\/strong><\/p>\n\n- Shaft Seal Type A<\/li>\n
- Shaft Diameter d1<\/li>\n
- Bore Diameter d2<\/li>\n
- Shaft Seal Width b1<\/li>\n
- Sleeve Material<\/li>\n
- Support Piece Material<\/li>\n
- Operating Temperature<\/li>\n
- Pressure (Standard up to 10 bar)<\/li>\n
- Circumferential Speed (up to 32 m\/s)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>Price Inquiry<\/span><\/a><\/div><\/div><\/div>
![\"Radialwellendichtring](\"https:\/\/domselag.ch\/wp-content\/uploads\/2017\/01\/typb.jpg\" "\\"typb\\"")
<\/span><\/div><\/div>Design Type B<\/p><\/h2><\/div>
The sealing lip faces away from the direction of press-fit.<\/p>\n
Application: Standard, simple sealing points.<\/p>\n<\/div>
<\/i><\/i><\/span>Installation \/ Dimension Lists: B<\/span><\/a><\/h3><\/div>\nInstallation Instructions<\/a><\/strong><\/h4>\nInstallation Steps<\/strong><\/a><\/h4>\nDimension List<\/strong><\/a><\/h4>\nPK Version<\/strong><\/a><\/p>\nOrdering Information<\/strong><\/p>\n\n- Shaft Seal Type B<\/li>\n
- Shaft Diameter d1<\/li>\n
- Bore Diameter d2<\/li>\n
- Shaft Seal Width b1<\/li>\n
- Sleeve Material<\/li>\n
- Support Piece Material<\/li>\n
- Operating Temperature<\/li>\n
- Pressure (Standard up to 10 bar)<\/li>\n
- Peripheral Speed (up to 32 m\/s)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>Price Inquiry<\/span><\/a><\/div><\/div><\/div>
![\"Radialwellendichtring](\"https:\/\/domselag.ch\/wp-content\/uploads\/2017\/01\/typab.jpg\" "\\"typab\\"")
<\/span><\/div><\/div>Design Type AB<\/p><\/h2><\/div>
The sealing lips are aligned with the direction of press-fit.<\/p>\n
Application: Sealing compressed air and gases; sealing in difficult-to-reach areas with minimal grease.<\/p>\n<\/div>
<\/i><\/i><\/span>Installation \/ Dimension Lists: AB<\/span><\/a><\/h3><\/div>\nInstallation Instructions<\/a><\/strong><\/h4>\nInstallation Steps<\/strong><\/a><\/h4>\nDimension List<\/strong><\/a><\/h4>\nPK Version<\/a><\/strong><\/h4>\nOrdering Information<\/strong><\/p>\n\n- Shaft Seal Type AB<\/li>\n
- Shaft Diameter d1<\/li>\n
- Bore Diameter d2<\/li>\n
- Shaft Seal Width b1<\/li>\n
- Sleeve Material<\/li>\n
- Support Piece Material<\/li>\n
- Operating Temperature<\/li>\n
- Pressure (Standard up to 10 bar)<\/li>\n
- Peripheral Speed (up to 32 m\/s)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>Price Inquiry<\/span><\/a><\/div><\/div><\/div>
![\"Radialwellendichtring](\"https:\/\/domselag.ch\/wp-content\/uploads\/2017\/01\/typac.jpg\" "\\"typac\\"")
<\/span><\/div><\/div>Design Type AC<\/p><\/h2><\/div>
The sealing lips are aligned in the same direction as the press-fit direction and in the opposite direction.<\/p>\n
Application: Proper separation of two media.<\/p>\n<\/div>
<\/i><\/i><\/span>Installation \/ Dimension Lists: AC<\/span><\/a><\/h3><\/div>\nInstallation Instructions<\/a><\/strong><\/h4>\nInstallation Steps<\/strong><\/a><\/h4>\nDimension Chart<\/strong><\/a><\/h4>\nPK Version<\/strong><\/a><\/h4>\nOrdering Information<\/strong><\/p>\n\n- AC-Type Shaft Seal<\/li>\n
- Shaft Diameter d1<\/li>\n
- Bore Diameter d2<\/li>\n
- Shaft Seal Width b1<\/li>\n
- Sleeve Material<\/li>\n
- Support Piece Material<\/li>\n
- Operating Temperature<\/li>\n
- Pressure (Standard up to 10 bar)<\/li>\n
- Peripheral Speed (up to 32 m\/s)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>Price Inquiry<\/span><\/a><\/div><\/div><\/div>
![\"Radialwellendichtring](\"https:\/\/domselag.ch\/wp-content\/uploads\/2017\/01\/typbc.jpg\" "\\"typbc\\"")
<\/span><\/div><\/div>Design type BC<\/p><\/h2><\/div>
The sealing lips face in the opposite direction to the press-in direction.<\/p>\n
Application: Sealing of compressed air and gases, sealing of difficult, low-lubrication sealing points.<\/p>\n<\/div>
<\/i><\/i><\/span>Installation \/ dimension list: BC<\/span><\/a><\/h4><\/div>Assembly Instruction<\/a><\/strong><\/p>\nInstallation Step by Step<\/a><\/strong><\/p>\nDimension list<\/strong><\/a><\/p>\n
Installation Instructions<\/a><\/strong><\/h4>\nInstallation Steps<\/strong><\/a><\/h4>\nMeasurement Chart<\/strong><\/a><\/h4>\nPK Version<\/strong><\/a><\/h4>\nOrder Information<\/strong><\/p>\n\n- Shaft Seal Type A<\/li>\n
- Shaft Diameter d1<\/li>\n
- Bore Diameter d2<\/li>\n
- Shaft Seal Width b1<\/li>\n
- Sleeve Material<\/li>\n
- Support Piece Material<\/li>\n
- Operating Temperature<\/li>\n
- Pressure (Standard up to 10 bar)<\/li>\n
- Circumferential Speed (up to 32 m\/s)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>Price Inquiry<\/span><\/a><\/div><\/div><\/div><\/span><\/div><\/div>
Design Type B<\/p><\/h2><\/div>
The sealing lip faces away from the direction of press-fit.<\/p>\n
Application: Standard, simple sealing points.<\/p>\n<\/div>
<\/i><\/i><\/span>Installation \/ Dimension Lists: B<\/span><\/a><\/h3><\/div>\nInstallation Instructions<\/a><\/strong><\/h4>\nInstallation Steps<\/strong><\/a><\/h4>\nDimension List<\/strong><\/a><\/h4>\nPK Version<\/strong><\/a><\/p>\nOrdering Information<\/strong><\/p>\n\n- Shaft Seal Type B<\/li>\n
- Shaft Diameter d1<\/li>\n
- Bore Diameter d2<\/li>\n
- Shaft Seal Width b1<\/li>\n
- Sleeve Material<\/li>\n
- Support Piece Material<\/li>\n
- Operating Temperature<\/li>\n
- Pressure (Standard up to 10 bar)<\/li>\n
- Peripheral Speed (up to 32 m\/s)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>Price Inquiry<\/span><\/a><\/div><\/div><\/div><\/span><\/div><\/div>
Design Type AB<\/p><\/h2><\/div>
The sealing lips are aligned with the direction of press-fit.<\/p>\n
Application: Sealing compressed air and gases; sealing in difficult-to-reach areas with minimal grease.<\/p>\n<\/div>
<\/i><\/i><\/span>Installation \/ Dimension Lists: AB<\/span><\/a><\/h3><\/div>\nInstallation Instructions<\/a><\/strong><\/h4>\nInstallation Steps<\/strong><\/a><\/h4>\nDimension List<\/strong><\/a><\/h4>\nPK Version<\/a><\/strong><\/h4>\nOrdering Information<\/strong><\/p>\n\n- Shaft Seal Type AB<\/li>\n
- Shaft Diameter d1<\/li>\n
- Bore Diameter d2<\/li>\n
- Shaft Seal Width b1<\/li>\n
- Sleeve Material<\/li>\n
- Support Piece Material<\/li>\n
- Operating Temperature<\/li>\n
- Pressure (Standard up to 10 bar)<\/li>\n
- Peripheral Speed (up to 32 m\/s)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>Price Inquiry<\/span><\/a><\/div><\/div><\/div><\/span><\/div><\/div>
Design Type AC<\/p><\/h2><\/div>
The sealing lips are aligned in the same direction as the press-fit direction and in the opposite direction.<\/p>\n
Application: Proper separation of two media.<\/p>\n<\/div>
<\/i><\/i><\/span>Installation \/ Dimension Lists: AC<\/span><\/a><\/h3><\/div>\nInstallation Instructions<\/a><\/strong><\/h4>\nInstallation Steps<\/strong><\/a><\/h4>\nDimension Chart<\/strong><\/a><\/h4>\nPK Version<\/strong><\/a><\/h4>\nOrdering Information<\/strong><\/p>\n\n- AC-Type Shaft Seal<\/li>\n
- Shaft Diameter d1<\/li>\n
- Bore Diameter d2<\/li>\n
- Shaft Seal Width b1<\/li>\n
- Sleeve Material<\/li>\n
- Support Piece Material<\/li>\n
- Operating Temperature<\/li>\n
- Pressure (Standard up to 10 bar)<\/li>\n
- Peripheral Speed (up to 32 m\/s)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>Price Inquiry<\/span><\/a><\/div><\/div><\/div><\/span><\/div><\/div>
Design type BC<\/p><\/h2><\/div>
The sealing lips face in the opposite direction to the press-in direction.<\/p>\n
Application: Sealing of compressed air and gases, sealing of difficult, low-lubrication sealing points.<\/p>\n<\/div>
<\/i><\/i><\/span>Installation \/ dimension list: BC<\/span><\/a><\/h4><\/div>Assembly Instruction<\/a><\/strong><\/p>\nInstallation Step by Step<\/a><\/strong><\/p>\nDimension list<\/strong><\/a><\/p>\n
Measurement Chart<\/strong><\/a><\/h4>\nPK Version<\/strong><\/a><\/h4>\nOrder Information<\/strong><\/p>\n\n- Shaft Seal Type A<\/li>\n
- Shaft Diameter d1<\/li>\n
- Bore Diameter d2<\/li>\n
- Shaft Seal Width b1<\/li>\n
- Sleeve Material<\/li>\n
- Support Piece Material<\/li>\n
- Operating Temperature<\/li>\n
- Pressure (Standard up to 10 bar)<\/li>\n
- Circumferential Speed (up to 32 m\/s)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>Price Inquiry<\/span><\/a><\/div><\/div><\/div><\/span><\/div><\/div>
Design Type B<\/p><\/h2><\/div>
The sealing lip faces away from the direction of press-fit.<\/p>\n
Application: Standard, simple sealing points.<\/p>\n<\/div>
<\/i><\/i><\/span>Installation \/ Dimension Lists: B<\/span><\/a><\/h3><\/div>\nInstallation Instructions<\/a><\/strong><\/h4>\nInstallation Steps<\/strong><\/a><\/h4>\nDimension List<\/strong><\/a><\/h4>\nPK Version<\/strong><\/a><\/p>\nOrdering Information<\/strong><\/p>\n\n- Shaft Seal Type B<\/li>\n
- Shaft Diameter d1<\/li>\n
- Bore Diameter d2<\/li>\n
- Shaft Seal Width b1<\/li>\n
- Sleeve Material<\/li>\n
- Support Piece Material<\/li>\n
- Operating Temperature<\/li>\n
- Pressure (Standard up to 10 bar)<\/li>\n
- Peripheral Speed (up to 32 m\/s)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>Price Inquiry<\/span><\/a><\/div><\/div><\/div><\/span><\/div><\/div>
Design Type AB<\/p><\/h2><\/div>
The sealing lips are aligned with the direction of press-fit.<\/p>\n
Application: Sealing compressed air and gases; sealing in difficult-to-reach areas with minimal grease.<\/p>\n<\/div>
<\/i><\/i><\/span>Installation \/ Dimension Lists: AB<\/span><\/a><\/h3><\/div>\nInstallation Instructions<\/a><\/strong><\/h4>\nInstallation Steps<\/strong><\/a><\/h4>\nDimension List<\/strong><\/a><\/h4>\nPK Version<\/a><\/strong><\/h4>\nOrdering Information<\/strong><\/p>\n\n- Shaft Seal Type AB<\/li>\n
- Shaft Diameter d1<\/li>\n
- Bore Diameter d2<\/li>\n
- Shaft Seal Width b1<\/li>\n
- Sleeve Material<\/li>\n
- Support Piece Material<\/li>\n
- Operating Temperature<\/li>\n
- Pressure (Standard up to 10 bar)<\/li>\n
- Peripheral Speed (up to 32 m\/s)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>Price Inquiry<\/span><\/a><\/div><\/div><\/div><\/span><\/div><\/div>
Design Type AC<\/p><\/h2><\/div>
The sealing lips are aligned in the same direction as the press-fit direction and in the opposite direction.<\/p>\n
Application: Proper separation of two media.<\/p>\n<\/div>
<\/i><\/i><\/span>Installation \/ Dimension Lists: AC<\/span><\/a><\/h3><\/div>\nInstallation Instructions<\/a><\/strong><\/h4>\nInstallation Steps<\/strong><\/a><\/h4>\nDimension Chart<\/strong><\/a><\/h4>\nPK Version<\/strong><\/a><\/h4>\nOrdering Information<\/strong><\/p>\n\n- AC-Type Shaft Seal<\/li>\n
- Shaft Diameter d1<\/li>\n
- Bore Diameter d2<\/li>\n
- Shaft Seal Width b1<\/li>\n
- Sleeve Material<\/li>\n
- Support Piece Material<\/li>\n
- Operating Temperature<\/li>\n
- Pressure (Standard up to 10 bar)<\/li>\n
- Peripheral Speed (up to 32 m\/s)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>Price Inquiry<\/span><\/a><\/div><\/div><\/div><\/span><\/div><\/div>
Design type BC<\/p><\/h2><\/div>
The sealing lips face in the opposite direction to the press-in direction.<\/p>\n
Application: Sealing of compressed air and gases, sealing of difficult, low-lubrication sealing points.<\/p>\n<\/div>
<\/i><\/i><\/span>Installation \/ dimension list: BC<\/span><\/a><\/h4><\/div>Assembly Instruction<\/a><\/strong><\/p>\nInstallation Step by Step<\/a><\/strong><\/p>\nDimension list<\/strong><\/a><\/p>\n
Order Information<\/strong><\/p>\n Design Type B<\/p><\/h2><\/div> The sealing lip faces away from the direction of press-fit.<\/p>\n Application: Standard, simple sealing points.<\/p>\n<\/div> PK Version<\/strong><\/a><\/p>\n Ordering Information<\/strong><\/p>\n Design Type AB<\/p><\/h2><\/div> The sealing lips are aligned with the direction of press-fit.<\/p>\n Application: Sealing compressed air and gases; sealing in difficult-to-reach areas with minimal grease.<\/p>\n<\/div> Ordering Information<\/strong><\/p>\n Design Type AC<\/p><\/h2><\/div> The sealing lips are aligned in the same direction as the press-fit direction and in the opposite direction.<\/p>\n Application: Proper separation of two media.<\/p>\n<\/div> Ordering Information<\/strong><\/p>\n Design type BC<\/p><\/h2><\/div> The sealing lips face in the opposite direction to the press-in direction.<\/p>\n Application: Sealing of compressed air and gases, sealing of difficult, low-lubrication sealing points.<\/p>\n<\/div> Installation Step by Step<\/a><\/strong><\/p>\n Dimension list<\/strong><\/a><\/p>\n\n
<\/span><\/div><\/i><\/i><\/span>Installation \/ Dimension Lists: B<\/span><\/a><\/h3><\/div>
Installation Instructions<\/a><\/strong><\/h4>\n
Installation Steps<\/strong><\/a><\/h4>\n
Dimension List<\/strong><\/a><\/h4>\n
\n
<\/span><\/div><\/i><\/i><\/span>Installation \/ Dimension Lists: AB<\/span><\/a><\/h3><\/div>
Installation Instructions<\/a><\/strong><\/h4>\n
Installation Steps<\/strong><\/a><\/h4>\n
Dimension List<\/strong><\/a><\/h4>\n
PK Version<\/a><\/strong><\/h4>\n
\n
<\/span><\/div><\/i><\/i><\/span>Installation \/ Dimension Lists: AC<\/span><\/a><\/h3><\/div>
Installation Instructions<\/a><\/strong><\/h4>\n
Installation Steps<\/strong><\/a><\/h4>\n
Dimension Chart<\/strong><\/a><\/h4>\n
PK Version<\/strong><\/a><\/h4>\n
\n
<\/span><\/div><\/i><\/i><\/span>Installation \/ dimension list: BC<\/span><\/a><\/h4><\/div>
![\"Radialwellendichtring](\"https:\/\/domselag.ch\/wp-content\/uploads\/2017\/01\/typasf.jpg\" "\\"typasf\\"")
<\/span><\/div>