
Design Type A
The sealing lip is aligned with the press-in direction.
Application: Normal and simple sealing applications.

Design Type B
The sealing lip is opposite to the press-in direction.
Application: Normal and simple sealing applications.

Design Type AB
The sealing lips are aligned with the press-in direction.
Application: Sealing of compressed air and gases, sealing in difficult, low-lubricating-grease sealing points.

Design Type AC
The sealing lips are aligned with and opposite the press-in direction.
Application: Correct separation of two media.
Required Ordering Information
- Radial shaft seal type B
- Shaft diameter d1
- Diameter of bore d2
- Width of radial shaft seal b1
- Material of collar
- Material of supprot ring
- Working temperature
- Pressure (standard up to 10 bar)
- Peripheral Speed (up to 32 m/s)
Required Ordering Information
- Radial shaft seal type B
- Shaft diameter d1
- Diameter of bore d2
- Width of radial shaft seal b1
- Material of collar
- Material of supprot ring
- Working temperature
- Pressure (standard up to 10 bar)
- Peripheral Speed (up to 32 m/s)
Required Ordering Information
- Radial shaft seal type AB
- Shaft diameter d1
- Diameter of bore d2
- Width of radial shaft seal b1
- Material of collar
- Material of supprot ring
- Working temperature
- Pressure (standard up to 10 bar)
- Peripheral Speed (up to 32 m/s)
Required Ordering Information
- Radial shaft seal type AC
- Shaft diameter d1
- Diameter of bore d2
- Width of radial shaft seal b1
- Material of collar
- Material of supprot ring
- Working temperature
- Pressure (standard up to 10 bar)
- Peripheral Speed (up to 32 m/s)

Design Type BC
The sealing lips are opposite to the press-in direction.
Application: Sealing of compressed air and gases, sealing in difficult, low-lubricating-grease sealing points.

Design Type A-SF
Can be pressed in in both directions.
Application: Narrow design for tight installation conditions, for pressures up to 15 bar.

Design Type B-SF
Can be pressed in in both directions.
Application: Narrow design for tight installation conditions, for pressures up to 15 bar.
Required Ordering Information
- Radial shaft seal type BC
- Shaft diameter d1
- Diameter of bore d2
- Width of radial shaft seal b1
- Material of collar
- Material of supprot ring
- Working temperature
- Pressure (standard up to 10 bar)
- Peripheral Speed (up to 32 m/s)
Required Ordering Information
- Radial shaft seal type A-SF
- Shaft diameter d1
- Diameter of bore d2
- Width of radial shaft seal b1
- Material of collar
- Material of supprot ring
- Working temperature
- Pressure (standard up to 10 bar)
- Peripheral Speed (up to 32 m/s)
Required Ordering Information
- Radial shaft seal type B-SF
- Shaft diameter d1
- Diameter of bore d2
- Width of radial shaft seal b1
- Material of collar
- Material of supprot ring
- Working temperature
- Pressure (standard up to 10 bar)
- Peripheral Speed (up to 32 m/s)